The board feeds the SD with 5V signals and 3.3V power, so you need an SD card with 5V tolerant pins. Most are, but do check.I can confirm the reader on this shield does work.
guys, i have this tft:http://www.ebay.com/itm/360699426541?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649could you help me to identify it's chip driver? Clearly it's not ili9341 or ili9340.Help me with the identifier code and pin definition pls.
To bring back subject to the table. I have this shield and I do not want to fry the SD card, how to understand it will survive 5v? the card is 4G transcend HC class 4?
I also have the mentioned mirror problem and i can not solve it. by the way posting 61 of this thread did do the work for me to initialize the displaythe shortcut in posting 62 did not work for me. i only now have the problem that everything is mirrorredmarc
hey i bought a 2.4 TFT Touch lcd on ebay.. but i cant see any chip set on the tft shield... i searched in therent but i was unable to find one.. plz help
There is a solution for those who have a problem with inverted touch-screen coordinates. In "tftpaint" sketch it can be easy resolved by changing these 4 strings:#define YP A1 // must be an analog pin, use "An" notation!#define XM A2 // must be an analog pin, use "An" notation!#define YM 7 // can be a digital pin#define XP 6 // can be a digital pinto#define YP A2 #define XM A1 #define YM 6 #define XP 7 it works on MEGA2560 with libraries Adafruit-GFX, SWTFT-Shield and Adafruit Touch-Screen
Hi,i've the same problem.I have 2.4'' TFT display, MCUFRIEND (it had ILI9341 LCD driver) on Arduino Uno.I've used this library,beacuse i have problem with the white screen,this: Library and videotutorialI have tftpaint inverted touch-screen coordinates,but the change had no effect.Can you help me?