Go Down

Topic: Blinking LED sketch to work on Arduino DUE (Read 945 times) previous topic - next topic

changks

Hi -

It seems I got a problem in my Arduino DUE.

I followed the instruction to connect the board. "ON" and "L" lights are on.

I got the following message on Serial Monitor:

Sketch uses 10,340 bytes (1%) of program storage space. Maximum is 524,288 bytes.
Erase flash
Write 10420 bytes to flash

[                              ] 0% (0/41 pages)
[=======                       ] 24% (10/41 pages)
[==============                ] 48% (20/41 pages)
[=====================         ] 73% (30/41 pages)
[============================= ] 97% (40/41 pages)
[==============================] 100% (41/41 pages)
Verify 10420 bytes of flash

[                              ] 0% (0/41 pages)
[=======                       ] 24% (10/41 pages)
[==============                ] 48% (20/41 pages)
[=====================         ] 73% (30/41 pages)
[============================= ] 97% (40/41 pages)
[==============================] 100% (41/41 pages)
Verify successful
Set boot flash true
CPU reset.



I spent time trying to get solutions, but it seems it is a common issue for others without a solution.


HELP ME! What should I do? Can you ship another one to me?


Thanks,
Michael



 

cmiyc


It seems I got a problem in my Arduino DUE.

You haven't stated the problem.


I got the following message on Serial Monitor:

To avoid confusion:  That is not the serial monitor.  That is the output console.  The serial monitor is different and must be opened separately.


Verify successful
Set boot flash true
CPU reset.

This is not an error.


HELP ME! What should I do? Can you ship another one to me?

This is not a customer service support forum.  If you want a return, you should contact the seller directly.
Capacitor Expert By Day, Enginerd by night.  ||  Personal Blog: www.baldengineer.com  || Electronics Tutorials for Beginners:  www.addohms.com

Go Up