// software SPI works on Maple Mini ARM 32-bit // use these settings for the OLED_Pro smart display... // These pin #'s are for Maple Mini/UNO/Nano/Mini328 #define OLED_DC 6 // D/C #define OLED_RESET 5 // RST #define OLED_MOSI 4 // SDA #define OLED_CLK 3 // SCL #define OLED_CS 7 // Not Connected to OLED board Adafruit_SSD1306 OLED(OLED_MOSI, OLED_CLK, OLED_DC, OLED_RESET, OLED_CS);
Just a note, on the due one, I still don't quite understand why the original author included his own copy of some of the sdfat files, with changes in the class names and little more than that. It would make more sense to just require the sdfat libraries to be available and use them.
I've just forked the git repo with the ESP8266 stuff in it, and I'm reconfiguring it so that it doesn't need to be installed into the "Program files" folder of the PC.As far as I can tell, there is no reason it needs to be installed in the old way. I'm pretty sure I've already made the config changes necessary so that the files can go into the "user" hardware folder e.g. like the STM32 stuff ;-)
OKIts uploaded to GitHubhttps://github.com/rogerclarkmelbourne/arduinesp...