Go Down

Topic: JTAG connection to Arduino MEGA (Read 2126 times) previous topic - next topic

westfw

I made this little (and rather trivial) board to allow me to connect an Atmel JTAGICE3 to an Arduino MEGA (also MEGA2560 and MEGA-ADK) for debugging (ie from Atmel Studio.)  Since it prevents shields from being used, it may not be terribly useful.  Also, it's a pain to set up on the software side.  But it does seem to work.

MEGA-jtag-adapt on Flickr

Shared board design at OSHPark

Go Up