Go Down

Topic: Project 2 : Space ship interface with 2 switches (Read 800 times) previous topic - next topic

pragamr


I am having trouble to get the following output :

Both Switches Off > Green LED glows (pin 5)
Switch A On > Red LED glows (pin 3)
Switch B On > Red LED glows (pin 4)

I connected one more switch with pin 7 and added one 10K resistor as done in the original configuration.

The output is weird as only one of the Red LED glows and buttons don't work

Code:
Code: [Select]
int A = 0;
int B = 0;
void setup (){
  pinMode (3,OUTPUT);
  pinMode (4,OUTPUT);
  pinMode (5,OUTPUT);
  pinMode (2,INPUT);
  pinMode (7,INPUT);
}
void loop (){
  A = digitalRead(2);
  B = digitalRead(7);
  if ( A == LOW && B== LOW ){
    digitalWrite(3, LOW);
    digitalWrite(4, LOW);
    digitalWrite(5, HIGH);
 
  }
  else {
    if (A == HIGH && B == LOW) {
    digitalWrite(5, LOW);
    digitalWrite(3, HIGH);
    digitalWrite(4, LOW);
   
    }
    else {
    digitalWrite(5, LOW);
    digitalWrite(4, HIGH);
    digitalWrite(3, LOW);
      }
    }
}

Go Up