Go Down

Topic: Problems Project 9 (Read 987 times) previous topic - next topic


I have assembled the breadboard as per the diagram fg1, but when I push the button nothing happens I know the motor works, because when I hot wire it from the 9 volt battery she lights right up.  I do see some red text on the bottom of the IDE which says " avrdude: stk500_getsync() : not in sync: resp=0x00".

If anyone has a suggestion I would appreciate some help.  I have checked and double checked the breadboard.  Thanks in advance.


I fixed it. I have two Arduino boards one comes on as com 6 and one comes on as com 1.  Once I corrected that it works as it should.  Power only when the switch is on.

Go Up