Go Down

Topic: Attiny 1634 not found in tools menu Arduino IDE (Read 973 times) previous topic - next topic


I have developed a design using arduino uno r3 and I would like to use attiny 1634 instead of atmega 328p. Learnt how to program attiny 85 using arduino isp. Need help for programming the attiny 1634,  couldnot find the attiny 1634 board in the tools menu of the arduino IDE. Did some research online and found out that i need to write a header file for attiny 1634. Please help with this header file.

Thanks in Advance.


Mar 30, 2015, 05:59 pm Last Edit: Mar 30, 2015, 06:14 pm by DrAzzy
You need to install a custom core to get support for the tiny1634, and I think AVRdude.conf also needs to be changed.

Rambo's core should work https://github.com/rambo/arduino-tiny/tree/attiny1634 (for 1.0.6 of IDE - will have to follow porting guidelines to make it work on 1.6.x).

My tiny841 core also should work with 1634 (also not drop-in ready for 1.6.x, but closer see readme ) https://github.com/SpenceKonde/arduino-tiny-841 - however testing of the 1634 part of it has been very limited - it's entirely possible I didn't pull everything it needed over.

The tiny1634 is a really nice chip - lot of capability in a small, cheap package. And the hardware serial has made it practical to put optiboot on the 1634 and 841.
ATTinyCore and megaTinyCore for all ATtiny, DxCore for DA/DB-series! github.com/SpenceKonde
ATtiny breakouts, mosfets, awesome prototyping board in my store http://tindie.com/stores/DrAzzy

Go Up