Go Down

Topic: A000073 - Arduino UNO SMD Rev3 (atmega16u2 and atmega328p-mu) bootloading (Read 5614 times) previous topic - next topic


Dear all,

I have to check it. I am waiting new boards and will try it again through ICSP.

My pcb assembler, says he has done it  using an Arduino as ISP programmer, and burning bootloader choosing board 'Arduino/Genuino Uno'. IDE shows next message:

C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude -CC:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf -v -patmega328p -carduino -PCOM15 -e -Ulock:w:0x3F:m -Uefuse:w:0x05:m -Uhfuse:w:0xDE:m -Ulfuse:w:0xFF:m

Kind regards,



Yes, you are right!! thanks again.

I attach a summary, I have checked several times, and it works.

Best regards,

Go Up