Go Down

Topic: 1602 LCD Keypad Shield (Read 1 time) previous topic - next topic


how do i connect the headers with normal female cables,
for extrnal use

i dont want to (click) the shield directly on the Arduino.
but use it external.


It sounds like you need some jumper cables, like these!


You'll need to connect A0 (for the buttons) and D4 through D10 (for the LCD) along with +5V and GND for power.  That's ten wires.
Send Bitcoin tips to: 1G2qoGwMRXx8az71DVP1E81jShxtbSh5Hp
See who has no social life: https://forum.arduino.cc/index.php?action=stats :)


Go Up