Go Down

Topic: Servo starts at 30 degress (Read 660 times) previous topic - next topic


As you can see there is a big difference from my servo's 0 point and any other servo. This results in many of my formulas not to work and it also jams the servo once it overpasses it default maximum degree.
Thank you for your help!
P.S: My servo is not a continues rotation one.


Is that the angle of the arm on your servo?
The arms are removable, the shaft has a spline so, lift the arm and reposition it in the correct position.

Tom... :)
Everything runs on smoke, let the smoke out, it stops running....


To me it just looks like you did not place the plastic arm on in the right position... Just unscrew it and place it back right up when the servo is @ 0 degree.
Use fricking code tags!!!!
I want x => I would like x, I need help => I would like help, Need fast => Go and pay someone to do the job...

NEW Library to make fading leds a piece of cake


Thanks, thought it was something serious ;)

Go Up