Go Down

Topic: Arduino Current Sensor question ! (Read 2268 times) previous topic - next topic

firashelou

hello,
i would like to know please how much voltage can this Inputs take ? or that depends on the connector used ?
Aiming for the unreachable !

My F1 project at https://firasf1dream.wordpress.com
Phoenix F1 page at https://www.facebook.com/phoenixf1p
my news aggregator website https://asserter.epizy.com

MorganS

The datasheet says that it has 2.1kV isolation between the sensing pins and the rest of the circuit.

I would not like to test two thousand volts that but it's obviously safe for 12V. If I was using it for a project plugged into the wall outlet then I would look closely at the PCB layout to see if its isolation is good.
"The problem is in the code you didn't post."

firashelou

The datasheet says that it has 2.1kV isolation between the sensing pins and the rest of the circuit.

I would not like to test two thousand volts that but it's obviously safe for 12V. If I was using it for a project plugged into the wall outlet then I would look closely at the PCB layout to see if its isolation is good.
lol oops 2.1kV isolation ! now i saw it at the top

thanks for your reply :)
Aiming for the unreachable !

My F1 project at https://firasf1dream.wordpress.com
Phoenix F1 page at https://www.facebook.com/phoenixf1p
my news aggregator website https://asserter.epizy.com

Go Up