Go Down

Topic: Question about DFRobot Motor Shield (Read 552 times) previous topic - next topic

jack1992

Hello to everyone.I have a question about the motor controller of DFRobot.How to change programatically pin number in shield?

For example the DFRobot motor controller has programatically pin number for directon the pin 7.How to change it and put another pin(for example pin 2)?


The motor Controller
http://www.dfrobot.com/index.php?route=product/product&path=156_51&product_id=59#.VrO9H7KLS70

PaulS

It is not possible to change the schematic of the board programmatically. The shield is hardwired to use pins 4, 5, 6, and 7.
The art of getting good answers lies in asking good questions.

jack1992

It is not possible to change the schematic of the board programmatically. The shield is hardwired to use pins 4, 5, 6, and 7.
Are you sure?

Go Up