Go Down

Topic: Not really new topic but have spent hours trying to get answer (Read 431 times) previous topic - next topic

chaotic1

I just received my arduino uno kit from Mactrast with a complete course. The instruction booklet that came with it is from seeed studio. I am trying to install on my Macbook Pro OS 10.10.5   I have followed the instructions numerous times using the instructions in the course sponsored by UDEMY. Every time I try to download the blink program I get the following error message which means nothing to me. It refers me to the forum and I go in circles.
Arduino: 1.7.8 (Mac OS X), Board: "Arduino Uno"

Arduino: 1.7.8 (Mac OS X), Board: "Arduino Uno"

Arduino: 1.7.8 (Mac OS X), Board: "Arduino Uno"

Sketch uses 1,030 bytes (3%) of program storage space. Maximum is 32,256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2,039 bytes for local variables. Maximum is 2,048 bytes.
avrdude: ser_open(): can't open device "/dev/tty.GoddesssiMac-SerialPort": Resource busy
ioctl("TIOCMGET"): Inappropriate ioctl for device
Problem uploading to board.  See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.

I am obviously choosing something wrong but I have no idea what any of this means. Very frustrated!


ieee488

Your IDE is from a different company. http://www.arduino.org/software
You need to ask them.

Here's the background on this.  http://forum.arduino.cc/index.php?topic=358657.0

sterretje

Or download and install an IDE from arduino.cc ;)
If you understand an example, use it.
If you don't understand an example, don't use it.

Electronics engineer by trade, software engineer by profession. Trying to get back into electronics after 15 years absence.

Go Up