Go Down

Topic: Zero schematic error (Read 938 times) previous topic - next topic


the Zero schematic shows DGI_GPIO1/3.1C going to pin 8 of J102 BUT that is the only appearance of DGI_GPIO1/3.1C and its source is not defined.


Same true for SDA/3.1C of pin 9 of J101
Same true for SCL/3.1C of pin 10 of J101


Apr 29, 2016, 05:10 am Last Edit: Apr 29, 2016, 05:10 am by westfw
They're there.  They just seem to have an "extra" "/3.1C" part in the "label."  (Which I don't know where it comes from, or what it means...)


Hi, it indicates the sheet it come from so it is not a bug :)

Go Up