Print
Go Down
Pages: [1]

Topic: Component Identification Help Please (Read 882 times) previous topic - next topic

Kerfwappie

May 22, 2016, 03:18 am Last Edit: May 22, 2016, 03:27 am by Kerfwappie
Hello All,
I was rummaging through my parts and found this curious looking component.  I tried searching the web for information on it to no avail.  It is labelled NSL-06-005.  It looks to be some sort of opto-gizmo.  It's well built and appears to be hermetically sealed.  Please have a look at the pictures I uploaded.  Any Ideas?  Thanks.
Eric

larryd

#1
May 22, 2016, 03:22 am
What is the forward/reverse resistance with/without light?

.
No technical PMs.
If you are asked a question, please respond with an answer.
If you are asked for more information, please supply it.
If you need clarification, ask for help.

Kerfwappie

#2
May 22, 2016, 03:32 am
It has two leads, the same length, no tabs or flat spots.  Nothing indicating polarity.  I measure between 29K - 70K with my finger over the window...as best I can and hold test leads.  I measure both directions and its about the same.

Kerfwappie

#3
May 22, 2016, 03:38 am
Okay... in a breadboard, with black tape over the window it measures open.  Remove the black tape and resistance is 6K.  So it looks like a NASA grade cds cell.

raschemmel

#4
May 22, 2016, 03:54 am
Arduino UNOs, Pro-Minis, ATMega328, ATtiny85, LCDs, MCP4162, keypads,<br />DS18B20s,74c922,nRF24L01, RS232, SD card, RC fixed wing, quadcopter

Kerfwappie

#5
May 22, 2016, 04:23 am
That is cool.. Thanks. 
Print
Go Up
Pages: [1]