Go Down

Topic: Cannot up load sketch (Read 777 times) previous topic - next topic

Moutfort

Cannot get board to load a sketch, tries 10 times and gives message  "not in sync. res=0xbd

Have gone through all trouble shooting suggestions, and have reloaded IDE but to no avail

T Evans Luxembourg

spycatcher2k

OK- Basics please :

What board
What IDE
What operating system
Describe what you actually tried
Provide a link to where you purchased the board
Describe What you see in the device manager (Com port added when Arduino plugged in)

I know it's a lot of questions, but without this information, anything would only be guesswork.
Mrs Drew
-=-
http://www.uk-pcb.co.uk - UK PCB Fab Company
I will design & code for you, but I will also charge you (PM me)
If you don't like my answers, realize : I'm not being cheeky, I'm Just trying to prompt you to use your own brain/google etc.

Moutfort

Board Genuino UNO

IDE 1.69

Tried ti Load BLINK to test board

Com port 7 Confirmed as Genuino UNO

After loading ...   Not in sync: resp=0xbd


spycatcher2k

Try a different USB port ON your PC, try a different USB lead - Don't use a hub, unpowered hubs don't really work well with Arduinos.
Mrs Drew
-=-
http://www.uk-pcb.co.uk - UK PCB Fab Company
I will design & code for you, but I will also charge you (PM me)
If you don't like my answers, realize : I'm not being cheeky, I'm Just trying to prompt you to use your own brain/google etc.

Moutfort

Have tried USB Connection and lead. have even tried a different pc result is always bad

spycatcher2k

Then your arduino is broken - assuming you have NOTHING connected to it other than the USB lead

Return it to the authorized seller for a replacement ;)
Mrs Drew
-=-
http://www.uk-pcb.co.uk - UK PCB Fab Company
I will design & code for you, but I will also charge you (PM me)
If you don't like my answers, realize : I'm not being cheeky, I'm Just trying to prompt you to use your own brain/google etc.

spycatcher2k

Quote
Vid 2341 Pid 0248
Can you confirm the Pid please - thats not a Genuino Pid.
Mrs Drew
-=-
http://www.uk-pcb.co.uk - UK PCB Fab Company
I will design & code for you, but I will also charge you (PM me)
If you don't like my answers, realize : I'm not being cheeky, I'm Just trying to prompt you to use your own brain/google etc.

Go Up