Go Down

Topic: Core 1.0.7 released (Read 12323 times) previous topic - next topic


The 5V pin can output 500mA if the bard is powered via USB and 1A if powered via the barrel jack. There is a third choice and you can get 1.5 A from the USB bus by shorting "1.5A SHORT" on the board.
Thanks for clarifying this!

The EEPROM is not advertised since it's not a real EEPROM but a flash "partition" used as EEPROM (byte addressed)
I already understood it's not a real EEPROM but now it looks like there is no support at all if you look to the specs page (Just my 2 cents).

Go Up