Go Down

Topic: Use of STM32F103C8T6 + ILI9341 + Adafruit_GFX (Read 347 times) previous topic - next topic


I need to know the correct connections STM32 <=>ILI9341 TFT screen using the Adafruit_GFX library:
The library doesn't say which TM32F103C8T6 pins are used.

// Start of my sketch
#include <Adafruit_ILI9341_8bit_STM.h>
#include <SPI.h>
#include <Adafruit_GFX.h>
#include <gfxfont.h>
  Adafruit_ILI9341_8bit_STM tft = Adafruit_ILI9341_8bit_STM();

Actually the connections are:

    TFT screen                 STM32F103C8T6
    SS    <-->  PA4 <-->  BOARD_SPI1_NSS_PIN
    SCK   <-->  PA5 <-->  BOARD_SPI1_SCK_PIN
    MISO  <-->  PA6 <-->  BOARD_SPI1_MISO_PIN
    MOSI  <-->  PA7 <-->  BOARD_SPI1_MOSI_PIN

void setup() {
void loop() {
// some display instructions

The screen lit up, the sketch runs, but there is no display on the screen.

THe TFT screen DC is not connected: is the DC pin not necessary ?

(I use this screen on other devices and it runs correctly)


Go Up