Go Down

Topic: https://downloads.arduino.cc/arduino-1.8.1-windows.exe (Read 1 time) previous topic - next topic

pedro1234

Good evening everyone,

I installed the software arduino -1.8.1 in the Windows and it always give the error in attachment.
Is possible help me?

Best Regards,

Pedro Sousa

pert

Attachment doesn't seem to have attached. Much better to just post error messages as text.

pedro1234

Good morning everyone
I installed the software arduino 1.8.1, in the windows and i´m not load any program.

Please see the error in attachment.

Thanks for your help.

Best Regards,

Pedro Sousa

pert

By posting the error as a PDF attachment you make it much less likely that you'll get help with your problem. We need the FULL error output as text.

When you encounter an error you'll see a button on the right side of the orange bar "Copy error messages". Click that button and then paste the error messages in a reply here USING CODE TAGS (</> button on the toolbar).

pert

I already asked you to post the error as text in your previous, duplicate post:
http://forum.arduino.cc/index.php?topic=456048
You're being very disrespectful of this forum.

pedro1234

Good afternoon,
Always give this error ( in below).
Some messages are in portuguese because the program is in portuguese.
I check the com port, everything ok, i check the model of the Arduino, always ok.

Thanks for your collaboration

Best Regards,
Pedro Sousa



Arduino: 1.8.1 (Windows XP), Placa:"Arduino/Genuino Uno"

O rascunho usa 1878 bytes (5%) do espaço de armazenamento do programa. O máximo é 32256 bytes.
Variáveis globais usam 186 bytes (9%) de memória dinâmica, restando 1862 bytes para variáveis locais. O maximo é 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
Ocorreu um erro a enviar o rascunho
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x60

Este relatório teria mais informação com a
opção «Mostrar mensagens detalhadas durante a
compilação» seleccionada nas Preferências.

pedro1234

Good afternoon,

I´am a begginer in the forum and it was only a simple mistake.

Thanks for your collaboration. Please if possible see the message below.

Some messages are in portuguese because the program is in Portuguese.

Best Regards,

Pedro Sousa

Arduino: 1.8.1 (Windows XP), Placa:"Arduino/Genuino Uno"

O rascunho usa 1878 bytes (5%) do espaço de armazenamento do programa. O máximo é 32256 bytes.
Variáveis globais usam 186 bytes (9%) de memória dinâmica, restando 1862 bytes para variáveis locais. O maximo é 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
Problema a carregar para a placa. Vê http://www.arduino.cc/en/Guide/Troubleshooting#upload para sugestões.
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x60

Este relatório teria mais informação com a
opção «Mostrar mensagens detalhadas durante a
compilação» seleccionada nas Preferências.

Go Up