Go Down

Topic: Welcome to the Arduino Web Editor (Read 12894 times) previous topic - next topic

Frank100

The plugin was installed with a no-admin networkaccount via a local admin.
Each time we have to install the plugin again.
Can it be done without reinstalling the plugin.
We don't want to work with an admin networkaccount.

Thanks in advance.

ballscrewbob

#31
Oct 27, 2018, 12:15 am Last Edit: Oct 27, 2018, 12:22 am by ballscrewbob
Might I  suggest you catch up on some of the posts at the top of the EDITOR section so you can add any information that is particular to your setup.
Individual schools tend to have different policy's in regards to software such as the editor so please add anything that could help in that regards.

Browser, OS etc etc. is all important information in getting you up and running.
The team is very responsive to EDU situations so there is a good chance they can help you out.

There are a few posts about this type of issue.
You may want to catch up on those first to see how far they take you.

There are also some additional posts in the CHROME editor section (not the same as Chrome browser) that may also help.

EDIT possible helpful links.

First
Second
Third

There are a few more but I cant seem to place them right now.

It may not be the answer you were looking for but its the one I am giving based on either experience, educated guess, google or the fact that you gave nothing to go with in the first place so I used my wonky crystal ball.

DaveTheDrummer

Hi guys, total noob here.
Just got an Uno with a kit of handy bits and I'm trying it for the first time.
I'm using an old laptop with Kubuntu on it.
Tried the web editor. Stuff opens up OK. Got the board connected and there's what I assume is a power LED and a flashing LED.
I tried the blink example in the editor but nothing happens to the board. Realised I need to use the breadboard. Got that all connected up to the right places. Decided to try the fade example as I can definitely tell that's nothing to do with the onboard LEDs.
Nothing happens to the LED though. It's definitely connected up OK.
I have the board selected in the editor as the Arduino/Genuino Uno. The arrow to upload to the board appears to be greyed out.
No idea why.
This seems to be the crux of the problem. Any idea what I'm doing wrong?

ballscrewbob

There are some LINUX specific posts you might want to read up on.
Think there were a couple about root permissions.

Sorry am not a linux person.
IIRC there were a couple more about 32 bit versions too so if it is older hardware they might also be worth looking out for.

The search magnifying glass (top right) could be you best bet but try be specific in your search terms as its not the best but it does work.

It may not be the answer you were looking for but its the one I am giving based on either experience, educated guess, google or the fact that you gave nothing to go with in the first place so I used my wonky crystal ball.

Go Up