Go Down

Topic: Hot wire foam cutter - Arduino PWM (Read 575 times) previous topic - next topic

adachsoft_com

Hello all,

Last time I did the Hot wire foam cutter but I missed the temperature control. So that's why I made a simple PWM control.
The whole project was based on Arduino ATtiny85 Digispark. For this project I only needed three pins, so the ATtiny85 is fine.
Also I carried the wires in the PVC pipes.



Hot wire foam cutter - Arduino PWM

http://geek.adachsoft.com/home/index/refid/acc

Go Up