Go Down

Topic: How to recover bricked ESP8266 (Read 514 times) previous topic - next topic

Warlib

Hello,

I had old very old firmware on my ESP-12 module, so, decided to upgrade.
I got the ESP8266 firmware from https://www.espressif.com/en/support/download/at?keys=&field_type_tid%5B%5D=14
I successfully uploaded firmware using Flash Download Tools (https://www.espressif.com/en/support/download/other-tools?keys=&field_type_tid%5B%5D=14).


Then I detached CPO0 PIN from GND and reboot the ESP8266.
After that, I completely lost it. :-( ESPlorer doesn't see the module at 9600 and 115200.
When I connected again GPO0 PIN to GND to upload firmware again, the Flash Download Tools doesn't see the module.

So, I don't understand what's a problem. I need to update firmware for several other modules and afraid to brick them also.   

Juraj

#1
Dec 24, 2018, 04:25 pm Last Edit: Dec 24, 2018, 04:28 pm by Juraj
the update can't be the reason. the bootloader is read-only in MCU and the firmware is flashed to external flash memory. the gpio 0 LOW activates the bootloader only at boot

Go Up