Go Down

Topic: Code problem (Read 808 times) previous topic - next topic

pointpoint85


Hello, I have tried many changes on my code but I still have so many error messages. If anyone could help me this would be really cool

aarg

  ... with a transistor and a large sum of money to spend ...
Please don't PM me with technical questions. Post them in the forum.

pointpoint85

Not the code is not me

aarg

Then ask the person that wrote it.
  ... with a transistor and a large sum of money to spend ...
Please don't PM me with technical questions. Post them in the forum.

larryd

Have you spent any time learning the basics?
There are great examples in the IDE that you can learn from.

.
No technical PMs.
If you are asked a question, please respond with an answer.
If you are asked for more information, please supply it.
If you need clarification, ask for help.

groundFungus

Which Arduino model are you using (Uno, Mega, ...)?  
You will save everyone's time if you read and follow the forum guidelines.  :)          
https://forum.arduino.cc/index.php/topic,148850.0.html
and
https://forum.arduino.cc/index.php?topic=97455.0

pointpoint85

The problem is that this person to abandon the project and his blog was updated only in 2011. It gives the link containing the arduino 1.0 with all necessary libraries. But with all this impossible to compile the code into arduino 1.0. The card used is an arduino nano

http://blog.openpyro.com/

groundFungus

Do the error messages say something about missing files?  Have you downloaded and properly installed all of the required libraries?  That is my best guess until we get to see the error messages.

Please read the "how to use the forum" stickies to see how to format code, post code and error messages and some hints on what we need to know to help you.
You will save everyone's time if you read and follow the forum guidelines.  :)          
https://forum.arduino.cc/index.php/topic,148850.0.html
and
https://forum.arduino.cc/index.php?topic=97455.0

UKHeliBob

OP - due to the nature of the project (a firework display control system) I strongly advise that you do not proceed with this project until you have more experience with the Arduino
Please do not send me PMs asking for help.  Post in the forum then everyone will benefit from seeing the questions and answers.

(deleted)


pointpoint85

Get the IDE with inbuilt Libraries here : PYRO_IDE
Already tried for a long time but without success.


OP - due to the nature of the project (a firework display control system) I strongly advise that you do not proceed with this project until you have more experience with the Arduino
This is only advice, I am not forced to follow him.

Go Up