Hi everyone. Thanks to TIMO for the extraordinary work. I have 2 questions: 1) I should add the PGN 0x1FE07 (here the documentationhttp://www.nmea.org/Assets/20130905 amendment at 2000 201309051 watermaker input setting and status pgn 130567.pdf) (it is well documented by NMEA) and also on the work of kees verruijt (canboat). Do you prefer to do it yourself and make the changes public or do you give me any advice on how to do it?2) A bidirectional data exchange is provided with this PGN (for example, for the flaps I can check their status but also change the position). It is not clear to me how to put the PGN in the library.
902 comments, spanning close to 10 years.... can we get a new, updated how-to post with all the common questions and issues addressed? I have a project I'd like to start, but I can't possibly read 901 other messages to make sure I am up to speed on this project. Halp!My rough project idea: I want to talk to a Simarine PICO system (https://www.simarine.net) and put that data into mqtt/influx/home assistant somehow. I see builds for the arduino so putting the data into mqtt seems very possible, but I'd like to maybe have an ODRIOD-H2 run the code since I know it has the horsepower.Where to begin.......
Hi All, Working on a project, Boat Computer. A Arduino Mega Pro and Nextion Display. I want to be able to send NMEA2000 data via MCP2515. To try it I have setup the FolowingAT Mega 2560 with MCP2515 Module (Int 21) with ActisenseListener -> AT Mega 2560 Pro with MCP2515 Module (Int 3). WindMonitor. Se attched picture and programs. It seems like the WindMonitor transmit messages.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~CAN device readyStart address claim for device 0241 : Pri:6 PGN:60928 Source:23 Dest:255 Len:8 Data:1,0,C0,FF,0,82,AA,C0495 : Pri:7 PGN:126993 Source:23 Dest:255 Len:8 Data:60,EA,0,FF,FF,FF,FF,FF1245 : Pri:2 PGN:130306 Source:23 Dest:255 Len:8 Data:1,6,4,17,22,2,FF,FF2246 : Pri:2 PGN:130306 Source:23 Dest:255 Len:8 Data:1,6,4,17,22,2,FF,FF3247 : Pri:2 PGN:130306 Source:23 Dest:255 Len:8 Data:1,6,4,17,22,2,FF,FF¨~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~But Nothing is received by ActisenseListener???~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~CAN device ready~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~I have read and tried to get the most out of this forum.All tips for troubleshooting and help are very welcome.PS Dowloaded and used all "fresh" Librarys from Timo.The goal of my project will be to send and receive data from my NMEA network, which today only includes a Raymarine Element 7s. THX Henrik
Bonjour Timo,I intend to buy the new TEENSY 4.0.Do you think it will work as well as a Teensy 3.2 or 3.6 with your library ?What kind of transceiver I must add to plug it with my N2K network ?I will prefer a ready-made board instead of something to solder.Thank you.FX VAN THUAN
NMEA2000ToWiFiAsSeaSmart:32:17: error: conflicting declaration 'tNMEA2000_esp32 NMEA2000' tNMEA2000_esp32 NMEA2000;
Unfortunately I have not had time to write "driver" for Teensy 4. On the other hand even Teensy 3.2 can handle rather big projects and Teensy 3.6 even much bigger.For Teensy 3.6 there is "Dual CAN-Bus adapter" and for Teensy 3.2 http://skpang.co.uk/catalog/teensy-canbus-breakout-board-include-teensy-32-p-1507.html. Those have problem that they are not isolated from NMEA2000 bus.What kind of interface you are looking for. I know company, who has different kind of proper boards.
You are conflicting since you use #include <NMEA2000_CAN.h> and then you redefine tNMEA2000_esp32 NMEA2000; You should either use common #include <NMEA2000_CAN.h> or forced method#include <NMEA2000_esp32.h> // https://github.com/ttlappalainen/NMEA2000_esp32