Create 10*10 rgb led matrix

dave-in-nj:
32 x 16 but we live in a 10-digit world...... 10 x 10
I think the same folks who did this also makes hot dogs in 10 packs and rolls in 8 packs.

I don't know man it was in the information of buying models here's the whole
Features:

Operating voltage : 2.4V~5.2V
Built-in 256kHz RC oscillator
External 32.768kHz crystal or 256kHz frequency source input
Selection of 1/2 or 1/3 bias, and selection of 1/2 or 1/3 or 1/4 duty LCD applications
Internal time base frequency sources
Two selectable buzzer frequencies (2kHz/4kHz)
Power down command reduces power consumption
Built-in time base generator and WDT
Time base or WDT overflow output
8 kinds of time base/WDT clock sources
32x4 LCD driver
Built-in 32x4 bit display RAM
3-wire serial interface
Internal LCD driving frequency source
Software configuration feature
Data mode and command mode instructions
R/W address auto increment
Three data accessing modes
VLCD pin for adjusting LCD operating voltage
HT1621: 44-pin LQFP package
HT1621B: 48-pin SSOP/LQFP packages
HT1621G: Gold bumped chip

Tnx checked out WS2812 100 leds cost around 34 dollars which is not that good but not that bad.Tough the neopixel costs too much more.