Go Down

Topic: happy time fun stuff For Sale! (Read 9788 times) previous topic - next topic


holyjewsus

School is ending soon, and once again I have loads of left over electronics, some unopened or barely used.  I'll be posting everything up as soon as all finals are complete, wondering if anyone is interested in a large amount of stuff for a large amount off?

keeper63

I will not respond to Arduino help PM's from random forum users; if you have such a question, start a new topic thread.

holyjewsus

#18
May 11, 2011, 07:58 am Last Edit: May 17, 2011, 03:03 am by holyjewsus Reason: 1
okay, first batch of stuff... that I have on hand at the moment:

GPS http://www.sparkfun.com/products/8975 totally unused: 45
Any volt micro voltage regulator: 5
still have sparkfun color lcd shield
2 LED bar graphs unusued: 1 dollar each
ultrasonic range finder: http://www.sparkfun.com/products/8503 totally unused, still sealed: 18
Protoshield assembled: 10
another sparkfun easy driver(headers soldered on but this one was never run...though it was on the bottom of my artbin ;) : 10
openlog data logger with 1 microsd flash card: 20
optoisolator breakout on sparkfun: totally unused: 2
2 xbees with chip antennas: never used! 20 each
xbee regulated explorer: never used 5
xbee usb explorer: never used 15
canakit motor driver as posted before 2amp one from sparkfun.

and I still have any other stuff from the first post I forgot, I'm going to be uploading another round of stuff soon... It's not rent this time... it's 3d modeling software...so expensive.

Onions

Quote
it's 3d modeling software...so expensive.

Ooh, what software? I have used pro desktop and pro engineer at my school (two 3d moddeling programs). They are hard to use (well, pro desktop is. Peo engineer is much easier), but great fun!

Onions.
My website: http://www.harryrabbit.co.uk/electronics/home.html Up and running now! (Feel free to look round!) :D

Valalvax

another sparkfun easy driver(headers soldered on but this one was never run...though it was on the bottom of my artbin smiley-wink : 10
2 xbees with chip antennas: never used! 20 each
xbee regulated explorer: never used 5
xbee usb explorer: never used 15



I'll buy the Easy Driver, Xbees, and the USB explorer


If you hurry up and post the OTHER stuff I'll look at it too, so you can save on shipping

holyjewsus

I use rhino now, but i want to get into poly modeling/games so I'm looking into modo or zbrush...

more stuff that I have at the moment!
1 vexta 166ozin pk266 motor nema 23 stepper(2amps per phase)... this is an unused motor, though I had it in a 4th axis prototype for a while it was never actually used. 18
1 trial size kit of smooth-on 0030 ecoflex silicne rubber, unopened, 18
1 gallon size kit of smooth-on RIGID 8 casting foam - 20 unopened
and I've got those two really big pk motors I listed before, I really need to get rid of them, so I'm open to offers. ;)
10 vibration motors from polulu, some sealed some used, 3 each, buy all 10 for 20... or make an offer... I'll prolly take it.

also thanks valavax, so you dont want the regulated xbee adapter that you copy/pasted

Valalvax

No, as far as I know I only need one, and when I googled it looked like that one is specifically for the Pro boards...

holyjewsus

http://www.sparkfun.com/products/8687

it's this, it says works with all xbee series including pro.

Valalvax


http://www.sparkfun.com/products/8687

it's this, it says works with all xbee series including pro.



No, the regulated one... I bought the USB one

holyjewsus

http://www.sparkfun.com/products/9132 works with all series and pro as well, but sorry misunderstood you.  If you're into any of the other stuff I posted I can ship your stuff as soon as I get paypal from you, mjk.kirschner@gmail.com.

I will be posting more but it's gonna be a while... all over the state right now.

Valalvax


http://www.sparkfun.com/products/9132 works with all series and pro as well, but sorry misunderstood you.  If you're into any of the other stuff I posted I can ship your stuff as soon as I get paypal from you, mjk.kirschner@gmail.com.

I will be posting more but it's gonna be a while... all over the state right now.



Sorry, meant to say earlier that none of the other stuff interested me (read: I didn't have enough money)

The paypal has been sent, you should have it by now, but I don't expect you to hop up at 2:20 to ship it :P

holyjewsus

got it, I'll get this out asap!

holyjewsus

wanted to add, I have another 166 ozin vexta, so thats 2, accepting offers!

holyjewsus

#29
May 17, 2011, 01:57 am Last Edit: May 17, 2011, 03:02 am by holyjewsus Reason: 1
adding 2 SHARP infrared sensors used, long range from sparkfun... with the jst connectors!!!! 10 each.
adding 3 makerbot optoendstop 2.1 kits, unopened: 5 each
servo tester from Hobbyking, used once to test a brushless motor: 4

Go Up