Go Down

Topic: Sharing some Fritzing parts that I've made (Read 10374 times) previous topic - next topic

RichardB_CAN

Apr 01, 2015, 10:42 am Last Edit: Apr 01, 2015, 08:48 pm by RichardB_CAN Reason: Added another board (MPL115A1).
Hello Everyone,

I've made some parts for Fritzing, and I figured I'd share them here.


Names and links:

NRF24L01+ Radio Transceiver Chip
https://code.google.com/p/fritzing/issues/detail?id=2753#c186

FC-28 Soil Hygrometer Board + Probe
https://code.google.com/p/fritzing/issues/detail?id=2753#c187

ENC28J60 Ethernet Breakout Board
https://code.google.com/p/fritzing/issues/detail?id=2753#c188

BMP180 Barometer Breakout Board (GY-68)
https://code.google.com/p/fritzing/issues/detail?id=2753#c189

Catalex MicroSD Breakout Module
https://code.google.com/p/fritzing/issues/detail?id=2753#c190

BH1750FVI Breakout Board (GY-30)
https://code.google.com/p/fritzing/issues/detail?id=2753#c191

TinyRTC DS1307 Breakout Board
https://code.google.com/p/fritzing/issues/detail?id=2753#c192

Barometric Pressure Sensor Breakout - MPL115A1
https://code.google.com/p/fritzing/issues/detail?id=2753#c193


I've checked them for errors, and everything seems okay when I use them. If something isn't right, feel free to let me know.


I'm also making some new parts - if you have a part in mind that you'd like to see, you can mention it here. The things I'll need to make the part are:

1. The name of the board/module
2. The outside dimensions in millimeters
3. Details about each pin (i.e. name -- e.g. VCC, GND, SDA)
4. An image of it at a reasonable resolution (as close to parallel as possible to the image plane -- that is, the edges of the board should be straight in the image)


I hope the parts are useful to you.


-Richard

P.S. If this should be posted in another subforum, please let me know which one.

P.P.S. Feel free to let me know of what projects you use the parts in (http://omnigatherum.ca/wp/?p=6#comments). Thanks.

q2dg



RichardB_CAN

Ouuuh yeahhh!!!
Thanks a lot!!

Gratters! This is art  :D
Thanks. I hope you find the parts useful.



(If you'd like, you can leave a comment here about how you've used them: http://omnigatherum.ca/wp/?p=6#comments)

bjorkselbow

Hi you wouldn't be able to tell me where I can find the FC-28 Soil Hygrometer part, Your link redirects me to the fritzing github and I can't seem to find it there.

ChrisTenone

Redirecting all incoming links to a portal page is dissing their users.
What, I need to say something else too?

Umberto73

Hi Richard,

many compliments for Your work :-)
I need a favour: can You share me the Fritzing Component of the BE40 module?
I saw It in the image You've posted; i mean the light sensor with screw potentiometer.

Thanks in advance, Umberto :-)

AlexKite

Hi Richard,

The link to TinyRTC DS1307 Breakout Board didn't work - please update!

Go Up