Go Down

Topic: Atmega32u4 custom board issue (Read 967 times) previous topic - next topic

Muzykk

I it is my first post on this forum so please be placable. I made my custom Atmega32u4 board for my project. Components came from clone of Arduino Pro Micro (with bootloader and code witch i uploaded) from AliExpress. I soldered everything in to my board according to my schematic. And the board doesn't works. I don't have any signal from that. Please help. My english is not perfect. https://easyeda.com/emateuszszczerba/mosu-v2 https://imgur.com/a/nQ0lCO2

pert

Also posted at:
https://arduino.stackexchange.com/q/56644
If you're going to do that then please be considerate enough to add links to the other places you cross posted. This will let us avoid wasting time due to duplicate effort and also help others who have the same questions and find your post to discover all the relevant information. When you post links please always use the chain links icon on the toolbar to make them clickable.

Muzykk


Go Up