Hi, Thanks for the Reply,
I read somewhere that upload via programmer messes with the bootloader?
I remember onetime I accedently clicked on it and closed the browser that opened (not sure if that was related?!?!)
Not sure about clone or not,
On the board it says UNO
Board into in Arduino says the following.
BN: Unknown board
VID: 1A86
PID: 7523
SN: Upload any sketch to obtain it
Here is info from upload log.
D:\Software\arduino-1.8.7\arduino-builder -dump-prefs -logger=machine -hardware D:\Software\arduino-1.8.7\hardware -tools D:\Software\arduino-1.8.7\tools-builder -tools D:\Software\arduino-1.8.7\hardware\tools\avr -built-in-libraries D:\Software\arduino-1.8.7\libraries -libraries D:\Documents\Arduino\libraries -fqbn=arduino:avr:uno -ide-version=10807 -build-path C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552 -warnings=none -build-cache C:\Users\PieterC\AppData\Local\Temp\arduino_cache_591167 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arduinoOTA.path=D:\Software\arduino-1.8.7\hardware\tools\avr -prefs=runtime.tools.arduinoOTA-1.2.1.path=D:\Software\arduino-1.8.7\hardware\tools\avr -prefs=runtime.tools.avrdude.path=D:\Software\arduino-1.8.7\hardware\tools\avr -prefs=runtime.tools.avrdude-6.3.0-arduino14.path=D:\Software\arduino-1.8.7\hardware\tools\avr -prefs=runtime.tools.avr-gcc.path=D:\Software\arduino-1.8.7\hardware\tools\avr -prefs=runtime.tools.avr-gcc-5.4.0-atmel3.6.1-arduino2.path=D:\Software\arduino-1.8.7\hardware\tools\avr -verbose C:\Users\PieterC\AppData\Local\Temp\untitled661141511.tmp\sketch_nov30a\sketch_nov30a.ino
D:\Software\arduino-1.8.7\arduino-builder -compile -logger=machine -hardware D:\Software\arduino-1.8.7\hardware -tools D:\Software\arduino-1.8.7\tools-builder -tools D:\Software\arduino-1.8.7\hardware\tools\avr -built-in-libraries D:\Software\arduino-1.8.7\libraries -libraries D:\Documents\Arduino\libraries -fqbn=arduino:avr:uno -ide-version=10807 -build-path C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552 -warnings=none -build-cache C:\Users\PieterC\AppData\Local\Temp\arduino_cache_591167 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arduinoOTA.path=D:\Software\arduino-1.8.7\hardware\tools\avr -prefs=runtime.tools.arduinoOTA-1.2.1.path=D:\Software\arduino-1.8.7\hardware\tools\avr -prefs=runtime.tools.avrdude.path=D:\Software\arduino-1.8.7\hardware\tools\avr -prefs=runtime.tools.avrdude-6.3.0-arduino14.path=D:\Software\arduino-1.8.7\hardware\tools\avr -prefs=runtime.tools.avr-gcc.path=D:\Software\arduino-1.8.7\hardware\tools\avr -prefs=runtime.tools.avr-gcc-5.4.0-atmel3.6.1-arduino2.path=D:\Software\arduino-1.8.7\hardware\tools\avr -verbose C:\Users\PieterC\AppData\Local\Temp\untitled661141511.tmp\sketch_nov30a\sketch_nov30a.ino
Using board 'uno' from platform in folder: D:\Software\arduino-1.8.7\hardware\arduino\avr
Using core 'arduino' from platform in folder: D:\Software\arduino-1.8.7\hardware\arduino\avr
Detecting libraries used...
"D:\Software\arduino-1.8.7\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10807 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\Software\arduino-1.8.7\hardware\arduino\avr\cores\arduino" "-ID:\Software\arduino-1.8.7\hardware\arduino\avr\variants\standard" "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552\sketch\sketch_nov30a.ino.cpp" -o nul
Generating function prototypes...
"D:\Software\arduino-1.8.7\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10807 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\Software\arduino-1.8.7\hardware\arduino\avr\cores\arduino" "-ID:\Software\arduino-1.8.7\hardware\arduino\avr\variants\standard" "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552\sketch\sketch_nov30a.ino.cpp" -o "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552\preproc\ctags_target_for_gcc_minus_e.cpp"
"D:\Software\arduino-1.8.7\tools-builder\ctags\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552\preproc\ctags_target_for_gcc_minus_e.cpp"
Compiling sketch...
"D:\Software\arduino-1.8.7\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10807 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\Software\arduino-1.8.7\hardware\arduino\avr\cores\arduino" "-ID:\Software\arduino-1.8.7\hardware\arduino\avr\variants\standard" "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552\sketch\sketch_nov30a.ino.cpp" -o "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552\sketch\sketch_nov30a.ino.cpp.o"
Compiling libraries...
Compiling core...
Using precompiled core: C:\Users\PieterC\AppData\Local\Temp\arduino_cache_591167\core\core_arduino_avr_uno_31314b8875c88b759a279e520c72f59b.a
Linking everything together...
"D:\Software\arduino-1.8.7\hardware\tools\avr/bin/avr-gcc" -w -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections -mmcu=atmega328p -o "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552/sketch_nov30a.ino.elf" "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552\sketch\sketch_nov30a.ino.cpp.o" "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552/..\arduino_cache_591167\core\core_arduino_avr_uno_31314b8875c88b759a279e520c72f59b.a" "-LC:\Users\PieterC\AppData\Local\Temp\arduino_build_607552" -lm
"D:\Software\arduino-1.8.7\hardware\tools\avr/bin/avr-objcopy" -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552/sketch_nov30a.ino.elf" "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552/sketch_nov30a.ino.eep"
"D:\Software\arduino-1.8.7\hardware\tools\avr/bin/avr-objcopy" -O ihex -R .eeprom "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552/sketch_nov30a.ino.elf" "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552/sketch_nov30a.ino.hex"
"D:\Software\arduino-1.8.7\hardware\tools\avr/bin/avr-size" -A "C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552/sketch_nov30a.ino.elf"
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
D:\Software\arduino-1.8.7\hardware\tools\avr/bin/avrdude -CD:\Software\arduino-1.8.7\hardware\tools\avr/etc/avrdude.conf -v -patmega328p -carduino -PCOM6 -b115200 -D -Uflash:w:C:\Users\PieterC\AppData\Local\Temp\arduino_build_607552/sketch_nov30a.ino.hex:i
avrdude: Version 6.3-20171130
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "D:\Software\arduino-1.8.7\hardware\tools\avr/etc/avrdude.conf"
Using Port : COM6
Using Programmer : arduino
Overriding Baud Rate : 115200
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x4b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x4b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x4b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x4b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x4b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x4b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x4b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x4b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x4b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x4b
avrdude done. Thank you.
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.