Go Down

Topic: Arduino Due Serial Port is not appearing in IDE tools option (Read 458 times) previous topic - next topic

ss8899

I am using Windows 10 and ardinuo board Due Version 1.8.7. When I want to upload Code then it gives following error:

''Arduino: 1.8.7 (Windows 10), Board: "Arduino Due (Programming Port)"

Der Sketch verwendet 34316 Bytes (6%) des Programmspeicherplatzes. Das Maximum sind 524288 Bytes.
No device found on COM5
Beim Hochladen des Sketches ist ein Fehler aufgetreten

Dieser Bericht wäre detaillierter, wenn die Option
"Ausführliche Ausgabe während der Kompilierung"
in Datei -> Voreinstellungen aktiviert wäre.''


I do not see the serial port option in IDE environment. I am looking for guidance and thanks in advance.

MAS3

Hi.

Com5 implies Windows OS.
Press and hold the windows key, and press pause|break (Pause|Untbr) .
Now click Device Manager (i don't know the German term for that).
Click Ports (Schnittstellen i suppose), and look for your Arduino.
It will have the Com-port number shown next to that entry in the list.
If you still can't find it, unplug your Arduino and reconnect it while keeping an eye on this list.
The port which disappears and reappears, will be your Arduino.
If it still isn't there either the drivers have been corrupted, or the USB to serial solution on your Arduino board has a problem.
Depending on which USB to serial solution is on your board (i don't know which ones are available for the Due), this might be a software problem requiring reprogramming.

Have a look at "blink without delay".
Did you connect the grounds ?
Je kunt hier ook in het Nederlands terecht: http://arduino.cc/forum/index.php/board,77.0.html

Go Up