Go Down

Topic: how to chang my ntp server ip address externally (Read 198 times) previous topic - next topic

keltron

like using serial read() fill array like
 


mycode is



// Time Server Port
#define NTP_PORT 123

// Time Server MAC address
byte mac[] = {                    // LM: Substitute fake MAC address associated with IP
//0xAA, 0xBB, 0xCC, 0xDD, 0xEE, 0xFF
  0x02, 0xB6, 0x7E, 0x00, 0x00, 0x02 };

// NTP Server IP Address
IPAddress ip(192, 168, 1, 225);   // LM: DHCP address assigned by Asus router.  Change this
                                  //     as appropriate for the implementation context.

KASSIMSAMJI

Expert To Be: Machine Learning And Computer/Machine Vision (ML/CV/MV)

GypsumFantastic

You say "externally"? Are you talking about changing your router's port forwarding settings?

keltron

pls write full code serial read using fill the a,b,c,d

byte a,b,c,d;


IPAddress ip(a, b, c, d);


Go Up