Go Down

Topic: 10CL016Y(stuffed) vs 10CL025Y(in schematic) (Read 460 times) previous topic - next topic

jwestmoreland

Hello All,

Just curious - why is the 10CL025Y in the schematic vs. the 10CL016Y being what is stuffed?

I did a search - didn't really find anything on this.  Of course, my searching foo may not be up to
snuff.

Thanks,
John W.

jwestmoreland

#1
Feb 09, 2019, 08:40 am Last Edit: Feb 09, 2019, 08:51 am by jwestmoreland
And this part is really small:  SMLP34RGB2W3.

I see the FPGA P/N issue has been logged obviously on github.

And, no u.FL (J10) but on-board antenna.



philippe_at_sysemb

Hi jwestmoreland,

an old answer from Dario :
https://forum.arduino.cc/index.php?topic=559641.0

Quote
Hi,
Initial offering is with a 16kle device, however we designed the board to accommodate also the bigger 25kle device. That is just a provision and right now we don't have a schedule to release the bigger one but it really depends on demand.
[/i]


jwestmoreland

Thanks philippe and pert - I see that now.

Regards,
John W.

Go Up