Go Down

Topic: Uploading Problem (Read 212 times) previous topic - next topic

imranaafrat

Arduino: 1.8.8 (Windows 10), Board: "Arduino/Genuino Uno"

Sketch uses 718 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
Problem uploading to board.  See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
Invalid library found in C:\Program Files (x86)\Arduino\libraries\OneWire-2.3.3: no headers files (.h) found in C:\Program Files (x86)\Arduino\libraries\OneWire-2.3.3
Invalid library found in C:\Program Files (x86)\Arduino\libraries\OneWire-master: no headers files (.h) found in C:\Program Files (x86)\Arduino\libraries\OneWire-master
Invalid library found in C:\Program Files (x86)\Arduino\libraries\OneWire-2.3.3: no headers files (.h) found in C:\Program Files (x86)\Arduino\libraries\OneWire-2.3.3
Invalid library found in C:\Program Files (x86)\Arduino\libraries\OneWire-master: no headers files (.h) found in C:\Program Files (x86)\Arduino\libraries\OneWire-master

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

PaulS

Quote
Problem uploading to board.  See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
If you HAD done this, you'd know the questions we are going to ask, and you would have provided the answers without us having to ask.
The art of getting good answers lies in asking good questions.

Go Up