Go Down

Topic: MKR Vidor 4000 Pinmapping (Read 569 times) previous topic - next topic

Tempest15

Feb 22, 2019, 08:35 pm Last Edit: Feb 22, 2019, 08:41 pm by Tempest15
I took the time and made a list on how the fpga connects to the arduino, the hdmi connector, the PCI and the MIPI Camera pins.

In the quartus prime software you can enter the pin numbers in the Pin Planner that generates the contrains.

I hope it will help you. I have seen many that have requested for an detailed pin plan.

pert

Thanks for sharing Tempest15! I'm sure this will be much appreciated.

Limba

#2
Feb 23, 2019, 03:36 pm Last Edit: Feb 23, 2019, 03:42 pm by Limba
<git repo path>\constraints\MKRVIDOR4000 contains vidor_s_pins.qsf
That have all fpga pins

Put this line in yut project qsf file
source ../../../constraints/MKRVIDOR4000/vidor_s_pins.qsf

Edit:
That file also contains needed IO type settings. like 2.5V or 3.3v etc. Also it have SDRAM and FLASH pins.

jwestmoreland

Thanks Tempest - but I'm going to post a question.

Go Up