Go Down

Topic: Error : avrdude: ser_recv(): programmer is not responding (Read 1 time) previous topic - next topic

revo

Hi,

I have 2 arduino cards and from the monday the twice does not work. When i do an upload, the RX led lights but not the TX.
For each programs i compile i get this error :
Quote

Binary sketch size: 896 bytes (of a 30720 byte maximum)
avrdude -v -v -v -v -patmega328p -carduino -P/dev/ttyUSB1 -b57600 -D -Uflash:w:/tmp/build8737048981535146992.tmp/Blink.cpp.hex:i


avrdude: Version 5.10, compiled on Mar 23 2010 at 15:03:00
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/etc/avrdude.conf"
         User configuration file is "/home/sylvain/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/ttyUSB1
         Using Programmer              : arduino
         Overriding Baud Rate          : 57600
avrdude: Send: 0 [30]   [20]
avrdude: Send: 0 [30]   [20]
avrdude: Send: 0 [30]   [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding

avrdude done.  Thank you.



I have the same problem with Windows and Linux/Ubuntu 10.04 i686

Thanks in advance

nickgammon


I have 2 arduino cards and from the monday the twice does not work.


You've lost me there. But from your mention of Monday are you saying it worked on Sunday? Or what?
Please post technical questions on the forum, not by personal message. Thanks!

More info: http://www.gammon.com.au/electronics

fuh

http://creativecommons.org/licenses/by-nc-sa/3.0/

Go Up