Go Down

Topic: Arduino UNO WiFi REV2 - Dead  (Read 221 times) previous topic - next topic

jcm3

Starting a new project with a Arduino UNO WiFi REV2. Day one with this unit, I unplug it from USB, plug it back in and now its dead. No lights, no voltage on the 3.3 or 5v pins.  I am assuming this is atypical behavior. 

Any ideas as to a restore?

pert

If you have any sheilds, wiring, or components attached to the Uno WiFi Rev2, disconnect them and see if the board alone will work.

Make sure the USB cable is fully plugged into the Uno WiFi Rev2 and your computer.

Go Up