Go Down

Topic: Read HCTL-2017-A00 On arduino  (Read 253 times) previous topic - next topic


I would like to read the number of pulse of my encoder on Arduino
I'm using a magnetic encoder who provide abz signal.
A friend recommand me to use the hctl-2017 quadrature decoder but i don't know how to implemantate it.

i put the link of the datasheet below:




May 28, 2019, 10:39 am Last Edit: May 28, 2019, 10:46 am by knut_ny
If the "magnetic encoder" can provide (directly or via adapter) signals in range 0..5V, the two signals can be diretly connected to arduino pins.  An interrupt-driven routine counts (and reports any movement)


May 28, 2019, 10:52 am Last Edit: May 28, 2019, 11:24 am by Lindowww
the problem is that my encoder provide high frequency signal (150 000 hz max) and if i connect it directly to my Arduino card i loose some pulses per turn.
i'd like to use this component to count and after send the informations to my arduino card.

Go Up