Go Down

Topic: Error compiling for board Arduino/Genuino Mega or Mega 2560. (Read 6466 times) previous topic - next topic

homescienceideas

Not sure what happened with this. I had it compiling and now it will not. Any help would be great guys:)


Arduino: 1.8.9 (Windows Store 1.8.21.0) (Windows 10), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

sketch\Marlin_main.cpp: In function 'set_probe_deployed':

sketch\Marlin_main.cpp:2307:3: internal compiler error: Segmentation fault

   }

   ^

Please submit a full bug report,

with preprocessed source if appropriate.

See <http://gcc.gnu.org/bugs.html> for instructions.

lto-wrapper.exe: fatal error: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\hardware\tools\avr/bin/avr-gcc returned 1 exit status

compilation terminated.

c:/program files/windowsapps/arduinollc.arduinoide_1.8.21.0_x86__mdqgnx93n4wtt/hardware/tools/avr/bin/../lib/gcc/avr/5.4.0/../../../../avr/bin/ld.exe: error: lto-wrapper failed

collect2.exe: error: ld returned 1 exit status

exit status 1
Error compiling for board Arduino/Genuino Mega or Mega 2560.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

pert

#1
Jun 17, 2019, 10:45 am Last Edit: Aug 15, 2020, 06:18 am by pert Reason: Update instructions to reflect release of new Arduino AVR Boards with the fix
This bug is specific to the 5.4.0-atmel3.6.1-arduino2 version of avr-gcc used by Arduino AVR Boards 1.6.22 and newer. It has been reported here:
https://github.com/arduino/Arduino/issues/7949

Here's the traditional workaround:

  • Tools > Board > Boards Manager
  • Wait for downloads to finish.
  • When you move the mouse pointer over "Arduino AVR Boards", you will see a "Select version" dropdown menu appear. Select "1.6.21".
  • Click "Install".
  • Wait for installation to finish.
  • Click "Close".



If you have File > Preferences > Check for updates on startup checked, the Arduino IDE may occasionally notify you that a new version of Arduino AVR Boards is available, you'll need to refrain from updating back to the new Arduino AVR Boards version, otherwise you'll be back to seeing the segmentation fault error again.


EDITED TO ADD MODERN INSTRUCTIONS:

This bug is specific to the 5.4.0-atmel3.6.1-arduino2 version of avr-gcc used by Arduino AVR Boards 1.6.22 through 1.8.9. It has been reported here:
https://github.com/arduino/Arduino/issues/7949

Here's the fix:
  • Tools > Board > Boards Manager
  • Wait for downloads to finish.
  • From the list of boards platforms, click "Arduino AVR Boards".
  • Click the "Update" button.
  • Wait for installation to finish.
  • Click "Close".

homescienceideas

I thought I was going crazy! Ha ha ha:) Thanks for the info and the help. That worked!

pert

You're welcome. This bug also drove me crazy when I first encountered it. I was trying to produce a minimal demonstration sketch so I could submit a bug report to Arduino but the bug comes and goes without rhyme or reason. I'm glad to hear it's working for you now. Enjoy!
Per

homescienceideas

Yeah, one min it was compiling and I go into my code to make some miner changes and I then recompile and it has not worked. It's been 2 weeks of trying to compile! Ha ha ha:)

ravenccp1

I am new to 3D printing and I am having this same issue. I have a CR-10S and Marlin, I am trying to get my BLTouch installed but continuously get that same error I tried doing what is above but I have no luck. What am I doing wrong?

pert

@ravenccpl, those instructions were written a year ago. Since that time, a new version of Arduino AVR Boards was released that fixes the bug. So my new advice for people getting this "lto1.exe: internal compiler error: Segmentation fault" error is to update to the latest version of Arduino AVR Boards:
  • Tools > Board > Boards Manager
  • Wait for downloads to finish.
  • From the list of boards platforms, click "Arduino AVR Boards".
  • Click the "Update" button.
  • Wait for installation to finish.
  • Click "Close".

PunkyMunky64

I am new to 3D printing and I am having this same issue. I have a CR-10S and Marlin, I am trying to get my BLTouch installed but continuously get that same error I tried doing what is above but I have no luck. What am I doing wrong?

Not sure what happened with this. I had it compiling and now it will not. Any help would be great guys:)


Arduino: 1.8.9 (Windows Store 1.8.21.0) (Windows 10), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

sketch\Marlin_main.cpp: In function 'set_probe_deployed':

sketch\Marlin_main.cpp:2307:3: internal compiler error: Segmentation fault

   }

I had a problem that was pretty similar, I was just uploading and editing my program, doing some changes, but not on a 3D printer. I made a backup in the same directory and when I uploaded it just failed to compile, showing that same error. My fix was eventually I realized some of the warnings were regarding my backup, so don't put backups or other programs in the same directory!!! It kept confusing me and the problem was it was trying to upload both at the same time and also the name for the backup was invalid, it was just a mess. So that was my solution, if the first doesn't work

   ^

Please submit a full bug report,

with preprocessed source if appropriate.

See <http://gcc.gnu.org/bugs.html> for instructions.

lto-wrapper.exe: fatal error: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\hardware\tools\avr/bin/avr-gcc returned 1 exit status

compilation terminated.

c:/program files/windowsapps/arduinollc.arduinoide_1.8.21.0_x86__mdqgnx93n4wtt/hardware/tools/avr/bin/../lib/gcc/avr/5.4.0/../../../../avr/bin/ld.exe: error: lto-wrapper failed

collect2.exe: error: ld returned 1 exit status

exit status 1
Error compiling for board Arduino/Genuino Mega or Mega 2560.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.


MakerSpaceYT

Not sure what happened with this. I had it compiling and now it will not. Any help would be great guys:)


Arduino: 1.8.9 (Windows Store 1.8.21.0) (Windows 10), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

sketch\Marlin_main.cpp: In function 'set_probe_deployed':

sketch\Marlin_main.cpp:2307:3: internal compiler error: Segmentation fault

   }

   ^

Please submit a full bug report,

with preprocessed source if appropriate.

See <http://gcc.gnu.org/bugs.html> for instructions.

lto-wrapper.exe: fatal error: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\hardware\tools\avr/bin/avr-gcc returned 1 exit status

compilation terminated.

c:/program files/windowsapps/arduinollc.arduinoide_1.8.21.0_x86__mdqgnx93n4wtt/hardware/tools/avr/bin/../lib/gcc/avr/5.4.0/../../../../avr/bin/ld.exe: error: lto-wrapper failed

collect2.exe: error: ld returned 1 exit status

exit status 1
Error compiling for board Arduino/Genuino Mega or Mega 2560.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

This bug is specific to the 5.4.0-atmel3.6.1-arduino2 version of avr-gcc used by Arduino AVR Boards 1.6.22 and newer. It has been reported here:
https://github.com/arduino/Arduino/issues/7949

Here's the traditional workaround:

  • Tools > Board > Boards Manager
  • Wait for downloads to finish.
  • When you move the mouse pointer over "Arduino AVR Boards", you will see a "Select version" dropdown menu appear. Select "1.6.21".
  • Click "Install".
  • Wait for installation to finish.
  • Click "Close".



If you have File > Preferences > Check for updates on startup checked, the Arduino IDE may occasionally notify you that a new version of Arduino AVR Boards is available, you'll need to refrain from updating back to the new Arduino AVR Boards version, otherwise you'll be back to seeing the segmentation fault error again.


EDITED TO ADD MODERN INSTRUCTIONS:

This bug is specific to the 5.4.0-atmel3.6.1-arduino2 version of avr-gcc used by Arduino AVR Boards 1.6.22 through 1.8.9. It has been reported here:
https://github.com/arduino/Arduino/issues/7949

Here's the fix:
  • Tools > Board > Boards Manager
  • Wait for downloads to finish.
  • From the list of boards platforms, click "Arduino AVR Boards".
  • Click the "Update" button.
  • Wait for installation to finish.
  • Click "Close".


I get the same code error for compiling. i tryed all the steps and still getting the same error

pert

I get the same code error for compiling. i tryed all the steps and still getting the same error
Please do this:
  • (In the Arduino IDE) click File > Preferences
  • Check the box next to "Show verbose output during: > compilation
  • Click "OK"
  • Sketch > Verify/Compile
  • After the compilation fails you'll see a button on the right side of the orange bar "Copy error messages". Click that button.
  • In a forum reply here, click on the reply field.
  • Click the </> button on the forum toolbar. This will add the forum's code tags markup to your reply.
  • Press "Ctrl + V". This will paste the compilation output between the code tags.
  • Move the cursor outside of the code tags before you add any additional text to your reply.


If the length of the output exceeds the forum's 9000 character limit, save it in a .txt file and post it here as an attachment. If you click the "Reply" button you'll see the "Attachments and other options" link that will allow you to make the attachment.

dmgck

I recently got a mega 2560 board, and have experienced this error after updating the AVR thing in boards manager. here's my error.
Code: [Select]
Arduino: 1.8.13 (Windows 10), Board: "Arduino Mega or Mega 2560, ATmega2560 (Mega 2560)"





















C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\camer\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\camer\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\camer\Documents\Arduino\libraries -fqbn=arduino:avr:mega:cpu=atmega2560 -vid-pid=2341_0042 -ide-version=10813 -build-path C:\Users\camer\AppData\Local\Temp\arduino_build_698461 -warnings=none -build-cache C:\Users\camer\AppData\Local\Temp\arduino_cache_619537 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arduinoOTA.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.arduinoOTA-1.3.0.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avr-gcc.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -verbose C:\Users\camer\Documents\Electronic Engineering\Arduino Sketches\Making_RGB_LEDs_work\Making_RGB_LEDs_work.ino

C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\camer\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\camer\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\camer\Documents\Arduino\libraries -fqbn=arduino:avr:mega:cpu=atmega2560 -vid-pid=2341_0042 -ide-version=10813 -build-path C:\Users\camer\AppData\Local\Temp\arduino_build_698461 -warnings=none -build-cache C:\Users\camer\AppData\Local\Temp\arduino_cache_619537 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arduinoOTA.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.arduinoOTA-1.3.0.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avr-gcc.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -verbose C:\Users\camer\Documents\Electronic Engineering\Arduino Sketches\Making_RGB_LEDs_work\Making_RGB_LEDs_work.ino

Using board 'mega' from platform in folder: C:\Program Files (x86)\Arduino\hardware\arduino\avr

Using core 'arduino' from platform in folder: C:\Program Files (x86)\Arduino\hardware\arduino\avr

Detecting libraries used...

"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\\Program Files (x86)\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-IC:\\Program Files (x86)\\Arduino\\hardware\\arduino\\avr\\variants\\mega" "C:\\Users\\camer\\AppData\\Local\\Temp\\arduino_build_698461\\sketch\\Making_RGB_LEDs_work.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Generating function prototypes...

"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\\Program Files (x86)\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-IC:\\Program Files (x86)\\Arduino\\hardware\\arduino\\avr\\variants\\mega" "C:\\Users\\camer\\AppData\\Local\\Temp\\arduino_build_698461\\sketch\\Making_RGB_LEDs_work.ino.cpp" -o "C:\\Users\\camer\\AppData\\Local\\Temp\\arduino_build_698461\\preproc\\ctags_target_for_gcc_minus_e.cpp" -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Program Files (x86)\\Arduino\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\camer\\AppData\\Local\\Temp\\arduino_build_698461\\preproc\\ctags_target_for_gcc_minus_e.cpp"

Compiling sketch...

"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\\Program Files (x86)\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-IC:\\Program Files (x86)\\Arduino\\hardware\\arduino\\avr\\variants\\mega" "C:\\Users\\camer\\AppData\\Local\\Temp\\arduino_build_698461\\sketch\\Making_RGB_LEDs_work.ino.cpp" -o "C:\\Users\\camer\\AppData\\Local\\Temp\\arduino_build_698461\\sketch\\Making_RGB_LEDs_work.ino.cpp.o"

In file included from C:\Users\camer\AppData\Local\Temp\arduino_build_698461\sketch\Making_RGB_LEDs_work.ino.cpp:1:0:

C:\Users\camer\Documents\Electronic Engineering\Arduino Sketches\Making_RGB_LEDs_work\Making_RGB_LEDs_work.ino: In function 'void loop()':

C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:41:14: error: lvalue required as left operand of assignment

 #define LOW  0x0

              ^

C:\Users\camer\Documents\Electronic Engineering\Arduino Sketches\Making_RGB_LEDs_work\Making_RGB_LEDs_work.ino:28:27: note: in expansion of macro 'LOW'

   if (digitalRead(pushR = LOW))

                           ^~~

exit status 1

Error compiling for board Arduino Mega or Mega 2560.


Some assistance with this would be awesome!
 Thanks all.


dmgck

Well I'm not exactly surprised that its user error, but thank you for the resources.

pert

You're welcome. I'm glad if I was able to be of assistance. Enjoy!
Per

Go Up