Try removing anything you have connected to pins 11 and 12 on your board.Make sure the board is not sitting on anything conductive that might be shorting out the pins.
- CreateAgent plugin is installed- you are using a compatible browser (Chrome works well, so does Safari on Mac)- you are able to upload a Blink example to your board using the Create online editor
Have you used the board before removing the antistatic foam? (It happens more often than you can imagine)
-no,this is my first time use online editor.
Hi. What do you mean by "no". Do you mean that you tried to upload the Blink sketch and the upload failed, or do you meant that you never tried?
So I can't use Arduino Create until I configure the encryption chip.