Go Down

Topic: MKR1200 stacking original MKR GPS and IMU shields (Read 804 times) previous topic - next topic

theogrm

Hi all,

Is it possible to stack up both shields GPS and IMU on the same MKR board?

https://store.arduino.cc/arduino-mkr-gps-shield

https://store.arduino.cc/arduino-mkr-imu-shield


Thanks in advance, regards, Theo

pert

Yes, you can do that. The MKR GPS Shield uses pins 7, 13, and 14. The MKR IMU Shield uses pin 0 and the I2C bus (pins 11 and 12). So there is no conflict between the two shields.

Go Up