Go Down

Topic: MKR1000 WIFI101 Updater Problem (Read 476 times) previous topic - next topic

SpyMer

Hello,
I try to update the MKR1000 Wifi-Firmware.

The board is correctly set as MKR1000. But when I select the correct port the port designation is: \dev\cu.usbmodem1201 (ARDUINO MKR WIFI 1010) (on a MAC OS). It is also curious that the function  for the board information is showing: BN: Arduino MKR WiFi 1010.

Ignoring that and going to the WIFI Updater, ist is only showing the NINA firmware updates for MKR WIFI 1010. Of cause the update fails if I try to install it.

Any idea how to procees ???

Regards

pert

With the MKR boards, if you accidentally have the wrong board selected from the Tools > Board menu and do an upload, it will cause the board to be recognized as whatever board you had selected from then on. Here's the solution:
  • Tools > Board > Arduino/Genuino MKR1000
  • File > New
  • Sketch > Upload

After that, the board will be recognized as a MKR1000 and your problem with the firmware updater will be solved as well.

SpyMer

Thx mate - you made my day. Solution is working.

pert

You're welcome. I'm glad to hear it's working now. Enjoy!
Per

Go Up