Go Down

Topic: Enclosure Box for Arduino Micro Board (Read 90 times) previous topic - next topic


Hi All,
Please help me in finding an enclosure box that is suitable to mount an Arduino micro board.I need a little bit of depth for mounting another sensor as well.



Probably one of the most vague questions here yet.
Go to Shapeways.com and you will find hundreds of Arduino stuff there.


No technical PMs.
If you are asked a question, please respond with an answer.
If you are asked for more information, please supply it.
If you need clarification, ask for help.


The all-time DIY Arduino enclosure used to be an Altoids tin. It was like a contest.

Honest, go out and look at packaging for small products as much of it is worthy of reuse.
1) http://gammon.com.au/blink  <-- tasking Arduino 1-2-3
2) http://gammon.com.au/serial <-- techniques howto
3) http://gammon.com.au/interrupts
Your sketch can sense ongoing process events in time.
Your sketch can make events to control it over time.


+1 for the altoids. But you can use ticktac-box or anything else you find

Go Up