Go Down

Topic: Error loading bootloader with Duemilanove (Read 264 times) previous topic - next topic

edgarmontoya985

Good afternoon everyone .. Recently I tried to install the bootloader at different ATMega328p microphones WITH AN Arduino Duemilanove, but I always get the same error .. I really doubt that they are the micros. This is the error thrown by the IDE:

Arduino: 1.8.10 (Windows 7), Card: "Arduino Duemilanove or Diecimila, ATmega328P"

avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 1 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 2 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 3 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 4 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 5 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 6 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 7 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 8 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 9 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 10 of 10: not in sync: resp = 0x03
Error burning bootloader



 if someone in the forum has the same thing happened to him or has any idea what it could be.

pert

Did you upload File > Examples > 11.ArduinoISP to the Duemilanove?

edgarmontoya985

Good morning.. Yes ido that but the result its the same... I donĀ“t know what happen whit that..

Go Up