ballscrewbob:
That is going to be an interesting piece when it comes off the printer.Did you got with 100% or a little less ?
This part is just a simple mount that will use the original Z-axis. I have to order longer rods and a longer ballscrew to build the Z-axis I eventually want.
After researching how to make parts stronger, it would seem that 100% infill is NOT the way to go. So, I decided to print at a temperature closer to my filaments max along with increasing the wall line count to 8 and 20% Gyroid infill. So, we'll have to wait and see as to how effective it will be. The small test piece I ran seems as hard as a rock. But who knows?
(I based my decision primarily on this fellows tests/information. There are a few others that he has that aren't in that playlist. Specifically the one on infill strength. Kid knows his stuff, IMO.)
ballscrewbob:
Have lots of neopixels but decided a disco ball effect may not be such a good idea.
Oh, come on! Live a little. Get the lights going. Put on some 70's music and strut your stuff!
