Go Down

Topic: Burning Bootloader from Arduino Uno to Arduino Uno (Read 1 time) previous topic - next topic

DJSXN

I'm new to arduino and i've been trying to do this for hours. I've searched multiple forums and still cannot find a fix. Ive checked and replaced my cables multiple times even though i know they are in the right spot... could anyone help me with this error?

Code: [Select]
Arduino: 1.8.10 (Windows 10), Board: "Arduino/Genuino Uno"


avrdude: Version 6.3-20171130
        Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
        Copyright (c) 2007-2014 Joerg Wunsch

        System wide configuration file is "C:\Users\jason\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino14/etc/avrdude.conf"

        Using Port                    : COM11
        Using Programmer              : arduino
        Overriding Baud Rate          : 19200
        AVR Part                      : ATmega328P
        Chip Erase delay              : 9000 us
        PAGEL                         : PD7
        BS2                           : PC2
        RESET disposition             : dedicated
        RETRY pulse                   : SCK
        serial program mode           : yes
        parallel program mode         : yes
        Timeout                       : 200
        StabDelay                     : 100
        CmdexeDelay                   : 25
        SyncLoops                     : 32
        ByteDelay                     : 0
        PollIndex                     : 3
        PollValue                     : 0x53
        Memory Detail                 :

                                 Block Poll               Page                       Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
          eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
          flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
          lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
          hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
          efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
          lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
          calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
          signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

        Programmer Type : Arduino
        Description     : Arduino
        Hardware Version: 2
        Firmware Version: 1.18
        Topcard         : Unknown
        Vtarget         : 0.0 V
        Varef           : 0.0 V
        Oscillator      : Off
        SCK period      : 0.1 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0xffffff (probably .avr8x_mega) (retrying)

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0xffffff (probably .avr8x_mega) (retrying)

Error while burning bootloader.
Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0xffffff (probably .avr8x_mega)
avrdude: Yikes!  Invalid device signature.
        Double check connections and try again, or use -F to override
        this check.


avrdude done.  Thank you.

CrossRoads

Provide more details of what you have connected.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

DJSXN



I am following this schematic exactly as shown, as well as having the usb connected to my 3.0 port on my laptop. 

CrossRoads

Try a 2.0 port instead. Arduino is known to have issues with USB 3.0
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

Go Up