Go Down

Topic: Nixie Tube Clock (Read 249 times) previous topic - next topic

Qdeathstar

Nov 05, 2019, 03:44 am Last Edit: Nov 05, 2019, 03:49 am by Qdeathstar
I know that Nixie tube clocks have become cliche but I just finished mines today.

I built it on a single pcb, well, except for the pin out for the mcu had to be changed... I swapped a cheapie esp8266 for a adafruit feather....

 got a 12v to 170v switching boost regulator, a 12v to 5v module, ws2812b leds, and an esp8266 ntp time clock.

https://m.youtube.com/watch?v=uhrow7fnCMA&feature=youtu.be

















A creaking creeping shadow
stiff against the freezing fog
glares at a tickless watch.

Time has failed him -- all things shall pass.

TomGeorge

Hi,'
I like the power factor meter case, very nice...

Tom.... :) :) :)
Everything runs on smoke, let the smoke out, it stops running....

Budvar10

Bitchen... wrong section BTW, there is Exhibition / Gallery. Do you afraid it would be lost in there?
Big +1.  :)
Arduino clone with ATmega1284P   http://forum.arduino.cc/index.php?topic=277260.0

Qdeathstar

No particular reason, I didn't think it mattered..
A creaking creeping shadow
stiff against the freezing fog
glares at a tickless watch.

Time has failed him -- all things shall pass.

Budvar10

Interesting nixie in the middle, with sine wave.
Arduino clone with ATmega1284P   http://forum.arduino.cc/index.php?topic=277260.0

Go Up