Need help with AVR Programmer from MDFLY

Using Arduino Microcontrollers
12

Same behavior with -0022 Optiboot_atmega328, and then a sketch

Binary sketch size: 1058 bytes (of a 30720 byte maximum)
C:\Program Files\Arduino-0022\hardware/tools/avr/bin/avrdude -CC:\Program Files\Arduino-0022\hardware/tools/avr/etc/avrdude.conf -v -v -v -v -patmega328p -cstk500v1 -P\.\COM10 -b57600 -D -Uflash:w:C:\Users\Owner\AppData\Local\Temp\build8830200800411043262.tmp\Blink.cpp.hex:i

avrdude: Version 5.4-arduino, compiled on Oct 11 2007 at 19:12:32
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

System wide configuration file is "C:\Program Files\Arduino-0022\hardware/tools/avr/etc/avrdude.conf"

Using Port : \.\COM10
Using Programmer : stk500v1
Overriding Baud Rate : 57600
avrdude: ser_open(): setting dtr
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Recv:
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: Send: Q [51] [20]
avrdude: Recv:
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

avrdude done. Thank you.