Go Down

Topic: Arduino Due USB to Serial programmer  (Read 1 time) previous topic - next topic

CyberOddity

Hi Guys,

I am currently working on software for a custom logic board that uses the Due micro controller (SAM3x8e). The logic board was designed with a program port connector which is connected to the following pins, Master Reset (NRSTB), RX0 (PA8), TX0 (PA9), 5v, ERASE (PC0) and GND.

To program the due micro controller, monitor its serial port and debug I have always used the TAIJIUINO Due programmer down-loader (linked below) which works perfectly. My issue is that I cant get my hands on these at the moment and need more. I am hoping someone may be able to suggest an alternative device that would have the same functionality as I am finding it hard to source one.



https://www.elechouse.com/elechouse/index.php?main_page=product_info&cPath=72_73&products_id=2213&zenid=87sskvcgaca908514fpmmm6lr4

ard_newbie


The DUE Core is sold with a programmer but unlike yours, the terminal socket from the programmer is male.....

https://fr.aliexpress.com/item/32681732855.html

CyberOddity

The DUE Core is sold with a programmer but unlike yours, the terminal socket from the programmer is male.....

https://fr.aliexpress.com/item/32681732855.html
Thanks for this, I will order this and give it a try, thanks again

Go Up