Go Down

Topic: Sketches Can't Upload to Factory-Fresh Nano Every (Read 32 times) previous topic - next topic

kronimiciad

Sep 16, 2020, 09:09 pm Last Edit: Sep 16, 2020, 09:10 pm by kronimiciad
Hey folks, first-time builder here.  I just got my Arduino Nano Every in the mail, and I'm trying to upload a modified version of the blink example to my new brand-new board.  However, every time I try to upload a sketch, the IDE just spins its wheels for around 5 minutes before giving up.  I've been trying to look through similar questions and haven't found anything that has solved my issue.  My OS is Windows 10.

Here's a snippet of the log (I've turned on verbose reporting for compilation and upload):
Quote
Arduino: 1.8.13 (Windows 10), Board: "Arduino Nano Every, None (ATMEGA4809)"

Forcing reset using 1200bps open/close on port COM1

         Using Port                    : COM1
         Using Programmer              : jtag2updi
         Overriding Baud Rate          : 115200
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
An error occurred while uploading the sketch
Here are the settings I'm currently using:
  • Board is set to Arduino Nano Every, using Arduino MegaAVR Boards 1.8.6
  • Registers emulation:  none (ATMEGA4809)
  • Port:  COM1 (there are no other options that appear for me, and no other port pops up in the device manager when I plug the board in)
  • Programmer:  Onboard Atmel mEDBG (UNO WiFi Rev2)

Here's what I've tried so far:
  • Disabled antivirus
  • Uninstalled and reinstalled Arduino IDE
  • Turning on registers emulation
  • Restarting computer
  • Resetting board
  • Using different USB cables
  • Using different USB ports (3.0 and 2.0)
  • Manually installing Arduino drivers to Windows (Windows said the most up-to-date drivers were already installed after I specified the directory to search in)
  • Nothing is connected to the board.
  • The pin-13 LED blinks, so there's a bootloader on the board.
  • I've reset the board before uploading.

Any help would be very much appreciated.  I'm about to give up and just return the board and swap it for a different one.

pert

When you open the Arduino IDE's Tools > Port menu, does it say "COM1 (Arduino Nano Every)", or does it only say "COM1"?

Juraj

https://arduino.stackexchange.com/questions/78054/cant-upload-sketches-to-arduino-nano-every

Go Up