Go Down

Topic: Problems with FT232 shield from DFrobor. (Read 846 times) previous topic - next topic

khdavid

Sep 22, 2011, 12:26 am Last Edit: Sep 22, 2011, 12:33 am by khdavid Reason: 1
Hi!

Please help. I googled all the internet but didn't find any solution.

I cannot manage to do that  FT232 shield from DFrobor works properly.
In fact it doesn't upload anything.


the shield:
http://www.dfrobot.com/index.php?route=product/product&filter_name=Ft232&product_id=147

Here the method i that tried to use last time:
https://sites.google.com/site/diygeigercounter/circuit-description

my fotos:

http://s002.radikal.ru/i197/1109/83/21119500bec4.jpg

http://s011.radikal.ru/i318/1109/a9/980f7c84deb6.jpg


If somebody has such problem? Any comment will be helpfull.

PS: I used 2 different computers and 2 different shields (this one and another from Sparkfun)

Thank you in advance

putyn

did you burn a bootloader on the atmega chip or did it came with a bootloader ?

khdavid

I tested  the chip that came with bootloader and another, which i i took from my arduino(not uno, with ft232- decimelia). There were no problem to burn they via arduino or using arduino's RX,TX,RESET.

Go Up